Cyclus Tools SN.10-W Snap.In Basic Tool

Depending on the manufacturer, Integrated headsets require different milling depths in the head tube. With this milling cutter, you can the desired depth directly on the tool. The adjustment range, which can be read on a scale, extends from 2.3 to 12 mm. With only one tool, you save money and space in your workshop. The milling cutter can also be used for conventional headsets. The milling cutter fits the Snap.In tool holder and is an extension of the proven tool system. The use of Cyclus Tools cutting oil extends the service life of the milling cutter. In addition, always ensure rotation in the mill direction – even when you’re pulling out. To avoid overly stressing the tool, even pressure must be applied to the cutter with the aid of the taper guide, spring and the threaded sleeve. Always mill slowly and evenly. Remove any chrome and anodized layers before milling to avoid excessive wear on the cutters or ” seizing” of the tool in the head tube.
Compatibility: SN.50-W tool holder
Manufacturer Number: 7202810
Contents:1 x Cyclus Tools SN.10-W basic toolincl. adjusting screwincl. spring cone guide