CYCLUS TOOLS Crown Race Fitting Tool 1.5″ Tools – Steering | Bike-Discount

The server for the fork cone provides fast and accurate assembly of the crown race onto the crown race seat.

---

Preparation

Before assembly, the dimensional stability of the crown race seat on the fork neck and cut it if necessary with the plan milling machine for the crown race seat after.

Application

• Push the crown race with the server serves on the steerer tube and hit the crown race to the crown race seat at the fork neck.
• You need due to its own weight court of server usually no tools. You can turn the fork cone with hand strength to the crown race seat.
• Pay attention to the correct position of the crown race (do not touch the wrong / tilt).

---

Tip

• Clean the crown race seat and handing cone thoroughly before installation of dirt, oil, etc.
• Beat at full carbon fork crown race with the feeling on the crown race seat, so you do not damage the carbon fibers.
• If the crown race very easily slide on the crown race seat secure the crown race eg u with Loctite storage. jack glue.

---

Scope of delivery: Server for Crown Race 1 1/2 ”